Wingtree X Lichicx Pumpkin Silent Hp

Switch Overview

The Pumpkin Silent HP Tactile is Wingtree's take on an HP-style large tactile bump, built in a warm orange and cream housing on a teal base with a jack-o'-lantern print on the top. Silicone dampening removes the bottom-out and return noise while leaving the bump fully intact. The POM stem runs inside a PC top housing and a nylon bottom housing, keeping the stroke smooth on either side of the tactile event. At 45g operating and 52g bottom-out on a 16mm KOS single-stage spring, the weighting is medium — enough to hold up a large bump without becoming tiring. Pre-travel is 2.4mm with 3.6mm total travel, so the bump takes up a substantial portion of the stroke and resolves close to the bottom. This is the loudest-feeling and quietest-sounding switch in the lineup: a big, obvious tactile event with almost no acoustic footprint. Pumpkin ships factory lubed and uses a five-pin dustproof stem wall design, so it drops straight into PCB-mount boards and feels consistent out of the bag.