KeyLab DB
KeyboardsSwitchesTrackballsBlogGuide
  1. Home
  2. Blog
  3. Featured Keyboard: Keychron Orca echo Normal Profile
Featured Keyboard

Featured Keyboard: Keychron Orca echo Normal Profile

Published 2026-11-17
Contents
  1. Introduction
  2. The short answer
  3. Specs
  4. Pre-sale lineup
  5. Highlights
    • Same hardware, normal-height feel
    • Existing backers do not have to buy again
    • A slightly larger battery
  6. Things to consider
  7. How it compares with the upcoming Valkey Orb
  8. Conclusion
  9. Explore more
  10. Sources
  11. FAQ

Introduction

This week's featured keyboard is the normal-profile version of the Keychron Orca echo we covered in September. The core is unchanged — a 49-key split with a 19mm trackball, a horizontal wheel, and scroll pads — but the switches are now normal-height switches.

The pre-sale opened on November 16, 2026 on Gizmodo Japan's GIZMART (CoSTORY) and, as of November 17, 2026, had raised about ¥14.12 million from 1,195 buyers. Delivery is planned for the end of April 2027.

Orca echo Normal Profile keyboard image

Orca echo Normal Profile

Keychron

Split KeyboardStandard Profile

The short answer

If you...Verdict
Liked the Orca echo but were unsure about low-profile switchesGood fit. Same trackball and controls, with normal-height switches
Missed the September pre-saleGood fit. A new Japan pre-sale, with a ¥22,908 super early bird price (until 12:00 JST, December 7, 2026)
Already ordered the low-profile version and want to try bothThe conversion kit is enough. ¥2,640 swaps the switches, keycaps, and plate
Care most about thinness and portabilityThe low-profile version suits you better. The left half grows from 22 to 29 mm, the right from 32 to 33 mm
Want to swap in any off-the-shelf MX-compatible switchWait for details. Support for generic MX-compatible switches is not stated as of this writing
Want it nowNot a fit. Delivery is planned for the end of April 2027

Specs

The following is based on KeyLab DB listings and the CoSTORY project page (as of November 17, 2026). Values for the low-profile version come from its KeyLab DB listing and our September article.

ItemNormal profileLow profile
LayoutSplit, 49 keys, column-staggeredSame
Pointing19mm trackball (right thumb), horizontal wheel, 2 scroll padsSame
SwitchesNinja MX (linear) / Samurai MX (tactile)Keychron Apex POM low profile (Ninja / Samurai)
Hot-swapYesYes
KeycapsIncluded (profile not stated)LSA profile
CaseAluminumAluminum
ConnectivityWired, Bluetooth (3 devices), 2.4GHzSame
Battery800 mAh650 mAh
FirmwareZMK (configured with Keychron Launcher)Same
SizeLeft 144 × 106 × 29 mm / right 144 × 106 × 33 mmLeft 144 × 106 × 22 mm / right 144 × 106 × 32 mm
WeightNot stated480 g (KeyLab DB listing)
BacklightNoneNone
DeliveryPlanned for end of April 2027Pre-sale orders ship in four batches from early December 2026

Pre-sale lineup

The CoSTORY project page lists four items (tax included; shipping extra, ¥1,410 for one unit to Honshu or Shikoku). The keyboard comes in black or white.

ItemPriceContents
Super early bird, 15% off (until 12:00 JST, Dec 7, 2026)¥22,908Orca echo normal profile keyboard
Early bird, 8% off¥24,794Same
Normal-profile conversion kit¥2,640Normal-profile switches and keycaps, replacement plate and screws, screwdriver
Orca echo Pro Keycaps¥3,300Low-profile keycaps with fewer legends (25 blank keycaps included)
  • The Pro Keycaps are for the low-profile version. They do not fit the normal-profile keyboard.
  • The conversion kit lets people who ordered the low-profile version in September rebuild their keyboard as a normal-profile one. As of November 17, 2026, more people had bought the kit than the keyboard itself.
  • For buyers outside Japan, Keychron has announced a Kickstarter for the low-profile version; whether the normal-profile version will be sold outside Japan has not been announced.

Highlights

Same hardware, normal-height feel

The project page says the basic specs are the same as the low-profile Orca echo, and that the main difference is the normal-profile switches. The division of labor stays the same: the trackball moves the cursor, the left-hand wheel scrolls horizontally, and the pads scroll vertically.

Low-profile switches have shorter travel, and people coming from a regular keyboard can find the feel unfamiliar. The split, column-staggered, 49-key layout takes practice either way, so being able to focus on the layout without also adjusting to a new key feel is the clearest benefit of this version.

Existing backers do not have to buy again

The low-profile version had over 26,000 buyers. The ¥2,640 conversion kit lets them try normal-profile switches without buying a second keyboard. You could even keep it low profile for travel and convert it for use at home.

A slightly larger battery

Battery capacity rises from 650 mAh on the low-profile version to 800 mAh (both per CoSTORY). The thicker case presumably makes room for it, but we could not find a rated battery life when writing.

Things to consider

  • A long wait: delivery is planned for the end of April 2027. The low-profile pre-sale also slipped from its original date (see the shipping schedule in our September article), so allow for some movement.
  • Less of the thinness advantage: the left half grows from 22 to 29 mm and the right from 32 to 33 mm. Your palms sit higher, so whether you need a palm rest is something to judge once you use it.
  • Switch compatibility is unconfirmed: you choose between Ninja MX and Samurai MX. The project page does not say whether off-the-shelf MX-compatible switches or keycaps will fit.
  • The layout still takes practice: with 49 keys there is no number row, so numbers and symbols live on layers.

How it compares with the upcoming Valkey Orb

Another trackball split with normal-height switches is the Valkey Orb, which Keychron is developing with Yushakobo. As announced in September, it has a 25mm trackball and Cherry MX-compatible hot-swap sockets, with a GIZMART crowdfunding campaign planned for within 2026 (not yet listed on KeyLab DB).

  • Orca echo normal profile: price and delivery date are announced; it shares parts with the low-profile version, and the conversion kit lets you move between the two.
  • Valkey Orb: a larger trackball and explicitly MX-compatible sockets; the prototype on display had a machined aluminum case.

See the comparison table in our September article for details.

Conclusion

The Orca echo normal profile is for people who want to try a split with a built-in trackball but were unsure about low-profile switches. The hardware, layout, and configuration match the low-profile version, so the decision comes down to one thing: thinness, or a normal-height typing feel. If you already ordered the low-profile version, the ¥2,640 conversion kit lets you try both.

Explore more

  • Featured Keyboard: Keychron Orca echo (low profile)
  • Standard-profile split keyboards compared
  • Seven low-profile split keyboards compared
  • Browse split keyboards on KeyLab DB

Sources

  • Keychron Orca echo Normal Profile (CoSTORY, Japanese)
  • Keychron Orca echo (CoSTORY, Japanese)
  • About the Valkey Orb, co-developed by Yushakobo and Keychron (Yushakobo, Japanese)

FAQ

How is it different from the low-profile Orca echo?
The CoSTORY project page says the basic specs are the same as the low-profile version; the main difference is the normal-profile switches (Ninja MX / Samurai MX). The case height (29 mm left, 33 mm right) and battery capacity (800 mAh) also change.
How much is it, and when does it ship?
On CoSTORY, the super early bird price (15% off, until 12:00 JST on December 7, 2026) is ¥22,908 and the early bird price (8% off) is ¥24,794, tax included with shipping extra. Delivery is planned for the end of April 2027.
I already ordered the low-profile version. Can I convert it?
A normal-profile conversion kit (¥2,640) is sold on the same page. It contains normal-profile switches and keycaps, a replacement plate and screws, and a screwdriver.
Can I use ordinary MX-compatible switches?
The switch names include "MX", but as of November 17, 2026 the project page does not say whether off-the-shelf MX-compatible switches can be fitted. Watch for updates if you plan to swap switches.

Featured Keyboard

Orca echo Normal Profile keyboard image

Orca echo Normal Profile

Keychron

Split KeyboardStandard Profile
View keyboard details

Related Keyboards

Keychron Q11 Ultra 8K Wireless Custom Mechanical Keyboard keyboard image

Keychron Q11 Ultra 8K Wireless Custom Mechanical Keyboard

Keychron

Split KeyboardStandard Profile
MD770PRO keyboard image

MD770PRO

Mistel

Split KeyboardStandard Profile
EPOMAKER Split70 keyboard image

EPOMAKER Split70

Epomaker

Split KeyboardStandard Profile
NocFree Lite Wireless Split Keyboard keyboard image

NocFree Lite Wireless Split Keyboard

NocFree

Split KeyboardStandard Profile

Related Posts

  • Featured KeyboardFeatured Keyboard: Keychron Orca echo — A 49-Key Split With the Trackball Built In2026-09-24
  • Featured KeyboardLofree Flow Lite 2: 84 vs 100 Keys and What Changed2026-11-01
  • Featured KeyboardFeatured Keyboard: Chosfox Init40 — A Row-Staggered 40% Made for First-Timers2026-10-03
日本語で読む← Back to blog

© 2026 KeyLab DB. All rights reserved.

SwitchesKeyboardsTrackballsGuideBlog
AboutFAQPrivacy PolicyContactkeylabdb.comTwitter

About Usage Data

We record on-site search usage (search keywords and filter conditions) and the switch/keyboard pages you view on our own server to help improve our content. Even if you select "Decline", aggregate records that do not identify you (viewed items, search conditions, etc.) are still kept. Selecting "Decline" stops transmission to Google Analytics and the recording of identifiers (anonymous ID, IP address hash, and linkage to your logged-in account). Privacy Policy